200G Muxponder 2x100G converge to 200G
The 200G Muxponder transmitter supports two QSFP28 client interface and one CFP2 line-side interface to support single-channel 200Gbps large-grain data transfers. The industry‘s most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
HUANET 200G Muxponder includes integrated OTN FEC capability on the transponder, allowing operation over longer distances or in applications requiring ultra-low bit error rates.
The 200G Muxponder from HUANET offer a choice of pluggable QSFP28 Client Side Optics and CFP2 -DCO Coherent DWDM Line Side Optics based on distance and capacity requirements.
The Coherent DWDM Optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM Optics can greatly increase the capacity and reach of an optical network, The 200G Muxponder models fits for HUA6000 Series CH04, CH08, CH20 Chassis.
Function
Media conversion
Signal repeating
Lambda conversion
Highlight
Support single channel 200Gbps
Client Side: 2x QSFP28 module
Line Side: CFP2 200Gbps coherent module
Ultra-long-distance transmission: FEC technology can be used to achieve 1500km transmission without regeneration
Large dispersion tolerance: 40000ps.nm
Support port loopback test
Support 80 channel wavelength tunable
Performance Parameter
| System Parameter | Technical Indicator | |
| Center Wavelength | DWDM 1529.5~1565.50nm | |
| Data Rate | 200Gbps | |
| 200G Interface | Client Side | 2xQSFP28 module |
| Line Side | CFP2 200Gbps coherent module | |
| FEC (Gain, Delay, BER Threshold) |
GFEC |
6.2dB, 1.2µs, 8.5e-2 |
|
100GE-SDFEC-LOW-LATENCY-SD2 |
10.6dB, 9.4µs, 1.40e-2 | |
|
100GE-SDFEC-LH-SD2 |
9.4dB, 7.9µs, 1.01e-2 | |
|
100GE-SDFEC-LOW-LATENCY-SD0 |
10.8dB, 9.4µs, 1.56e-2 |
|
| NMS | TELNET, SNMP, WEB | |
| Size | 191 (W) x 253 (D) x 42 (H) mm | |
| Environment | Operating Temperature | -10℃ ~ 60℃ |
| Storage Temperature | -40℃ ~ 80℃ | |
| Relative Humidity | 5% ~ 95% Non-condensing | |
| Power Consumption | ≤50W | |
Ordering Information
|
Model |
Function |
Protocols |
Client Side |
Line Side |
| HUA6000-DQ2CFP2 | 2xQSFP28 to CFP2-DCO 200G Coherent Module Muxponder | LAN or WAN PHY: 100Gbps | QSFP28×2 | CFP2-DCO |
HUA Series Chassis is the foundation for deploying and managing the HUANET multi-service mixed-media solutions.
|
HUA Series Chassis Optional |
|||
|
CH04 Chassis: 482.5(W) x 350(D) x 44.5(H) mm |
1U 19-inch chassis |
1 network management slot |
3 universal service slots |
|
CH08 Chassis: 482.5(W) x 350(D) x 89(H) mm |
2U 19-inch chassis |
1 network management slot |
7 universal service slots |
|
CH20 Chassis: 482.5(W) x 350(D) x 222.5(H) mm |
5U 19-inch chassis |
1 network management slot |
19 universal service slots |
|
Power Consumption: 1U <120W, 2U<200W, 5U<400W |
|||
|
Support SNMP, Web, CLI multiple network management modes |
|||
| Support dual power supply redundancy protection, Power supply support AC: 220V / DC: -48V optional | |||
HUA Series Chassis support multiple service intermixing:
|
100G Transponder |
100G OEO |
4/8/16/40/48 Channel DWDM MUX/DEMUX, or OADM Card |
|
2x100G to 200G Muxponder |
25G OEO |
4/8/16 Channel CWDM MUX/DEMUX |
|
4x25G to 100G Muxponder |
2x10G OCP Transponder |
OLP Optical Line Protection |
|
4x10G SFP+ Transponder |
8×1.25G Convergence 10G Muxponder |
EDFA Card |
Applications
Telecom
Data center
5G Network
Long Haul Network
HUA DWDM transmission solution
DWDM peer-to-peer case
DWDM chain network case
DWDM+OLP optical line protection Case
DWDM Ring network case
DWDM single fiber bidirectional networking case
DWDM ultra long distance solution
